Solutions

Nav:主页 > English > Solutions >
  • 17-02-27Change the principle of engineering thermal plastic analysis

    Change the principle of engineering thermal plastic analysis of LED high efficient and safe radiator: LED as a new type of energy-saving and environmental protection, green lighting products, its application prospect is very optimistic, bu...

  • 17-02-06Heat pipe and the mean temperature plate (VC) in the details

    Heat pipe and the mean temperature plate (VC) in the details of the heat transfer process Heat pipe (Heatpipe) and the mean temperature plate (Vapor Chamber, VC) in high power and high integration are widely used in electronic products. Wh...

  • 17-02-03Thermal conductive silicone piece with thermal conductivity

    Thermal conductive silicone is filled with heating device and the air gap between the heat sink or metal base, flexible, elastic characteristics make its can be used to cover a very uneven surfaces. Heat conduction from separation device o...

  • 15-11-09Nylon PA6 thermal conductive plastic in the application of L

    Nylon PA6 thermal conductive plastic in the application of LED lamp cup of thermal conductivity advantages: the LED is the incandescent lamp, fluorescent and HID lamp and the fourth generation of new light source. LED light source, the eme...

  • 15-11-05A new thermal conductive silicone base board packaging techn

    A new thermal conductive silicone base board packaging technology High power heat dissipation problem : Heat dissipation is high power LED lamps and lanterns is the biggest technical threshold, each manufacturer on the design of the heat...

  • 12-07-16Thermal silica film to solve the challenges of a complex sys

    We are familiar with in terms of performance and cost, lower power consumption of electronic equipment is becoming a key differentiating factor. This not only is the case for portable devices, set-top box or TV, etc. The same is true if po...

  • 12-05-28LED temperature rise solution to the problem

    LED industry in the past in order to get the full white LED beam, once the development of large-size LED chips trying to take this way to achieve the desired goals. But, in fact, exert power white LED lasts for more than 1W beam but will d...

  • 12-05-25QFN package to solve the heat dissipation problem of LED dis

    Most of today's display manufacturers , PCB design almost always facing to the problem of heat , especially because of the heat affected LED driver chips normal luminescence properties ; in turn affects the entire screen color uniformity ....

  • 12-05-22LED heat causes

    Integrated current injection efficiency of the luminescent quantum efficiency of the chip external light extraction efficiency, and ultimately probably only 30-40% of the input electrical energy into light energy, the remaining 60-70% of t...

  • 12-05-18Analysis of LED lighting to indoor lighting technology requi

    LED lighting market opportunity is huge, broad space for development. LED lighting applications has been developed from past outdoor landscape lighting LED interior lighting applications. According to the analysis of the next five years, L...

  • 12-05-16Several methods of manufacturing high-power LED chips

    To get a high-power LED devices, it is necessary to prepare a suitable high-power LED chips. Usually the manufacture of high-power LED chips are summarized as follows: ①: the large size of France. By increasing the effective light emittin...

  • 12-04-26LED substrate, solid crystal way and thermal conductive mate

    The latest experiment report shows, with 100 W of integration module contrast, use pure copper module in the chip to the high temperature to 75 degrees Celsius, the use of diamond-cu piece of modules chip temperature only 65 degrees Celsiu...

  • 12-04-24LED optical/thermal simulation

    As light-emitting diode (LED) prices lower, LED lighting market competition becomes increasingly fierce, in order to accelerate to LED products listed schedule and reduce overall development costs, in product officially open mold productio...

  • 12-04-19Simple and easy to identify death LED lights and the solving

    A simple and easy to identify, virtual welding die lamp More simple, but quite predictions identify death the method that is LED lights for the light wouldn't light and heat. We put some not bright LED's light LED leads heated to 200-300...

  • 12-04-12The LED illumination need accurate power and thermal managem

    LED technology has made rapid development, and chip design and material improvement promoted the brighter and more durable source of development, light source application range widening. Energy saving to enhance awareness of LED lighting u...

  • 12-04-11Thermal conductive materials quality of vital for LED

    With more and more LED lighting applications, some can't imagine problems in the application of emerged. A manufacturer reflect, meet LED lights in the installation of the decline of the phenomenon appears after the light source, in the ex...

  • 12-04-03Showing LED heat dissipation

    As is known to all, the LED is one of the advantages of has high photoelectric conversion efficiency, compared with the traditional light source a boost, but due to the development of current technology limited, the efficiency will probabl...

  • 12-04-02Cooling module lacquer material to come loose hot effect is

    The street about LED heat , and a less to all have discussed but rather the key part that is outside of the lacquer that bake heat lamps module. LED the use environment of street lights for outdoor, by environmental climate interference, t...

  • 12-03-30LED in a cost advantage cooling fan

    Talking about the heat LED street light module, relevant solution is quite multivariate, can be divided into cooling fins are, thermal plastic case, fan, thermal tube, surface radiation heat treatment and natural convection radiator, etc....

  • 12-03-29Flip slices and eutectic can effectively reduce the thermal

    The inversion of encapsulation way for the currently lower LED thermal resistance of important technical trend. In addition to can reduce the heat resistance, flip piece of packaging color and light has LED consistency advantage, and this...

  • 12-03-28Use the quality and thermal conductivity plate heat glue

    Limited to technology, LED the conversion efficiency is still around twenty percent, that is a staggering eighty percent of electric energy converted into heat energy, so the heat dissipation problems facing the LED lighting is always an i...

  • 12-03-23High power LED cooling will be more the active cooling schem

    As is known to all, the LED is one of the advantages of has high photoelectric conversion efficiency, compared with the traditional light source a boost, but due to the development of current technology limited, the efficiency will probabl...

  • 12-03-20Different application decision LED different drive way

    Linear regulators to convert voltage will be faced with a power consumption problems, switch is the way the problem of noise, LED drive choose which the switch pattern depends on what applications. How to kind of conversion method? Through...

  • 12-03-12AMOLED panel analytical

    In terms of the structure of AMOLED , because AMOLED department is red, blue, and green color material using steam plating, printing, coating processes the base board evenly, itself is color to shine, and therefore AMOLED panel will not ne...

  • 12-03-09Thermal conductive silicone and thermal conductive silicone

    Thermal conductive silicon grease Thermal conductive silicone fat is used to fill CPU and heat sink into the space between the material of a kind of, this material and thermal interface materials called. Its function is used to heat sink t...