Data center server thermal hardware — atmospheric photograph for case studies

Real results from real projects

Engineering outcomes from anonymized OEM programs — thermal pads, greases, phase change materials, and custom die-cuts for AI servers, power conversion, and industrial electronics.

Smart Glasses Thermal Management Solution
Électronique grand public

Leading Global Consumer Electronics Brand

Smart Glasses Thermal Management Solution

TIF700M high-performance thermal pad and TIR340A1-P1 ultra-thin graphite sheet (1200 W/m·K, down to 0.04 mm) cut processor temperature by 8.7°C and surface temperature by 6.2°C in a sub-50 g smart-glasses frame, eliminating thermal throttling while reducing material cost 12–18%.

−8.7°C

Processor temperature

Read case
NEV Battery Pack Thermal Gel Solution
Nouvelles énergies et batteries de VE

Leading Domestic Power Lithium-Ion Battery Manufacturer

NEV Battery Pack Thermal Gel Solution

TIF020-19S and TIF035AB-05S two-component thermal gels replaced pre-die-cut pads on EV and ESS battery packs — >50% compressibility fills 0.5–5 mm gaps, fully automated dispensing cut BOM cost 35%, validated against LV124 vibration and 125 °C / 1000 h aging.

−35%

BOM cost vs die-cut pads

Read case
EV Battery Pack Low-Temperature Heating Solution
Nouvelles énergies et batteries de VE

Leading Full-Stack New Energy Vehicle Manufacturer

EV Battery Pack Low-Temperature Heating Solution

A layered low-temperature heating stack — Kheat SP silicone heaters, ultra-thin PI film heaters (0.2–0.5 mm, 1–2 W/cm²), and TIF100 thermal interface materials — delivers uniform, fast cold-start heating, validated for full operation from −40°C to 85°C.

−40°C ~ 85°C

Validated operating range

Read case
Humanoid Robot AI Thermal Management Solution
Centres de données et IA

Leading Embodied-AI Humanoid Robot Developer

Humanoid Robot AI Thermal Management Solution

A five-material thermal stack — TIF700RUS pad, PCM-TIC800H, TIF090-11 gel, TIF100-30-11S pad, and TIG680 potting — cooled the AI processor by 18.5 °C, extended full-load runtime from under 45 minutes to over 2 hours, and raised MTBF above 5,000 hours.

−18.5 °C

AI processor temperature

Read case
800G / 1.6T AI Optical Module Thermal Solution
Centres de données et IA

Leading AI Optical Interconnect OEM

800G / 1.6T AI Optical Module Thermal Solution

Ultra-soft TIF700UU pad and TIC800T-ST PCM-metal composite for next-gen 800G and 1.6T optical transceivers in AI data centers — 10 psi lower compression stress at 70% deflection.

−10 psi

Compression stress vs competitor

Read case

Narratives are anonymized OEM programs; for specifics or NDA discussion, contact engineering.

Your next thermal solution starts here.

From rapid prototyping to full-scale production — our engineers are ready to design a custom thermal solution for your application. Trusted by 7,000+ clients across EV, 5G, and consumer electronics.