TIR26000-120 — Graphite sheets for thermal management (— W/m·K nominal) — gallery view 1 of 1

TIR26000-120 Thermal Graphite Sheet

Standard Size (mm)
90×90
Thickness (inch/mm)
0.012 /0.30
Density (g/cm³)
≤1
Recommended Operating Temperature (℃)
-40~125
Download TIR26000-120 datasheet (PDF)
Overview

TIR®26000-120 Series High Performance Graphene Thermal Pad

TIR®26000-120 Series is centered around a thermally conductive filler which, through precise process control, forms a continuous arrangement within the polymer matrix. This establishes an efficient heat transfer pathway and significantly enhances thermal conductivity. This structural characteristic enables the material to meet the demanding cooling requirements of high power density scenarios such as base stations and chips. Additionally, the gasket possesses low density and excellent resistance to compression deformation, making it suitable for assembly in confined spaces while contributing to improved process efficiency and long-term reliability.

Features

TIR26000-120 — what to validate in production

  • Low thermal resistance

  • Low-permeability oil

  • Stable and reliable thermal performance

  • Low density

Technical specifications

TIR26000-120 — datasheet specifications

Values below are transcribed from the official datasheet. Use the linked PDF for sign-off and lot-specific CoA.

Request application engineering support
TIR26000-120 — datasheet property table
ParameterValue (typical / as stated)Method / note
ColorMetallic GrayVisua
Standard Size (mm)90×90ASTM D5947
Thickness (inch/mm)0.012 /0.30ASTM D374
Density (g/cm³)≤1ASTM D792
Recommended Operating Temperature (℃)-40~125ZKTM J025
Thermal Impedance (℃· in2/W) @50psi≤0.009ASTM D5470
Tensile Strength (kPa)≥10.0ASTM D412
Compression Stress (psi) @50%≤65ASTM D575
Oil Bleed Rate (%)≤1.5ZKTM G030
RoHS 2.0CompliantIEC 62321
REACH StandardsCompliantEC 1907/2006
Halogen-free RequirementCompliantEN 14582

* Match values to the PDF revision cited on your purchase order.

Same product family

Related graphite sheets for thermal management models

Back to family overview
ModelThicknessView
TIR3000.012~0.040 mmDetails
TIR300AL0.050~0.080 mmDetails
TIR300C0.040~0.080 mmDetails
TIR300CU0.060~0.080 mmDetails
TIR300G0.005~0.15 mmDetails
TIR300L-A10.15 mmDetails
TIR6000.127~0.508 mmDetails
FAQ

TIR26000-120 — common questions

Replacing another vendor's TIM or need a stack review? Send drawings — applications responds quickly.

Talk to an engineer
Is the TIR®26000-120 thermal pad electrically insulating?

No. This graphene-based pad is electrically conductive and must not be used where electrical isolation is required. If your application needs dielectric insulation, please ask us about our silicone or ceramic insulating TIM series.

What is the thermal conductivity / thermal impedance of this pad?

The TIR26012-120 delivers a thermal impedance of ≤0.009 °C·in²/W at 50psi, making it suitable for high-power-density components like base station chips and server CPUs.

What thicknesses and sizes are available?

The standard thickness is 0.30 mm (0.012″) with a 90×90 mm sheet. The TIR® series supports custom thicknesses and sheet sizes — contact our team with your requirements.

What temperature range can it handle?

It is rated for continuous operation from **-40°C to 125°C**, suitable for both industrial and consumer electronics environments.

Is it RoHS and REACH compliant?

Yes. It is fully compliant with RoHS 2.0, REACH (EC 1907/2006), and halogen-free requirements (EN 14582).

Your next thermal solution starts here.

From rapid prototyping to full-scale production — our engineers are ready to design a custom thermal solution for your application. Trusted by 7,000+ clients across EV, 5G, and consumer electronics.